Polycom ip phone updating initial configuration friends and dating online
In order to utilize Lync integration a This process can be used on any of the Polycom SIP Phones which support 4.x software today (Sound Point IP, Sound Station IP, VVX, and Spectra Link models).The Polycom SIP phones support a few different methods for software updates, most commonly utilizing a central FTP provisioning server so that all devices will check a single distribution point for configuration changes and new firmware images. This is my first Free PBX server and first time setting up a SIP server, so please answer in Layman's. Processing configuration (it hangs here) I have also tried the firmware (slot 2, Polycom 1.01) which is the same bootrom version but one is lync and the other is non-lync.This was music to my ears as my previous VVX Management Tool was built on a combination of hacked together legacy features of the phones and can now be replaced with a supported API.So with this new API at my disposal, I decided to rip the guts out of the old version of the tool and re-engineer it from the ground up for an all new version 2.0 release!In previous versions (Polycom SIP software 3.x or earlier) this manual process was not available.
To start this off let’s begin with the brains behind it all: the TFTP server, also known as, Trivial FTP server.Choose which method of download you prefer and install the software on your local Windows-based machine.In your installation process, you will be prompted to download 2.0 which can be downloaded here if not already installed: Today’s discussion will be on Polycom and how to upload the latest Firmware.For some of you this will be a repetitive read, if you have done this before, but for those just starting out in the industry, or just wanting to learn some new information on Vo IP, then this is for you.